Suzuki ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1 (Edited by Moderator)
I have no spark. I know the coil is good but it won't turn over with the starter button. I have disassembled and cleaned the button assembly and checked all the fuses. It will turn over if you hot wire it. So I know the starter is good, but still no spark. Even with the pull start. What could it be?
 

·
Super Moderator
Joined
·
7,477 Posts
You obviously checked the fuses. But did you check the starter relay and clean all the connections from the battery/terminals all the way to the starter. As for your no spark. I know you probably checked it already. But did try simply replacing the spark plug..? If all the fuses and relays are good, as well as the coil. Then the issue might be with the stator. I believe there are tests to check for continuity, etc. But I am unsure of the exact procedure. And lastly, as dumb as it may sound, make sure your kill switch wasn’t accidentally flipped on.


Sent from my iPhone using Tapatalk
 
1 - 2 of 2 Posts
Top