[Foot0069]

Actually got a chance to get to the barn for a minute. Started getting them out of the mud. They sure aren't spring chickens.

 

[Dacaur]

Wow, 10000 miles, impressive. Do how many complete machines do you think you will get? Or are you going to order parts and complete them all?

 

[Foot0069]

Hoping for two. One to plow snow and pull firewood and another for the bride to use for the chickens and garden. The challenge is to use the least amount of cash.

 

[Foot0069]

Well thing's get put off. Now I'm up to 5. Was told it ran but the clutch is shot. This one has a good set of plastics and is heading straight into the shop.

 

[John1960]

Welcome back. Your OP was from 3 years ago. Time flies.
Were those rental machines? I see numbers on them as if someone was trying to keep track of them , or refer to them by unit ID.

 

[Foot0069]

Unit ID
They were used at a ski resort to tow portable snow guns around. The plastics are shot from rolling down the mountain.

 

[John1960]

Ahhh, so they are experienced in the art of rollovers!

 

[Foot0069]

Easy to do that mountains steep! Those boys tore some stuff up. The snowmobiles stayed in the shop. Went through a lot of Front skies.

 

[Foot0069]

Let the fun begin.

 

[Foot0069]

3 of the wheels came off. Golly the rust on this wheel, so a bit of a battle coming up.

 

[Foot0069]

Went old school on the lug nut. Cold chisel and hammer 🔨. Looks like a 98 to me.

 

[Foot0069]

Went old school on the lug nut. Cold chisel and hammer 🔨. Looks like a 98 to me. View attachment 23008
View attachment 23007

Dang that makes it a quadrunner. Thought I might just swap a 300 top end but nope. 72mm stoke versus 76mm for the King.

 

[Foot0069]

Now I can see. Anybody know what the arrows pointing at? Odd bpth sides same bolt loose.

 

[ajl719]

Can’t make out what that arrow is pointing at. Not sure if that’s a plug or something else.

 

[Foot0069]

It's some kind of electrical plug I'll have to look at it closer. Trying to get it ready for the car wash. There's a wire dangling at the taillight connector I figure is for reverse, maybe an extra power connector? There's no brake light switch but an empty female that might be for that close. Brake pedal shaft is corroded so soaking till tomorrow, it moves but tight. It's against the foot rests so... I get that free and I'll have brakes to roll it off the trailer. Has compression, might even try to run someday.

 

[ajl719]

That female plug at the back is a auxiliary plug to add a reverse light or some other accessory.

 

[Foot0069]

Makes it hard to want to work in the unheated pole barn. But I'm going to give it a shot.

 

[Foot0069]

Had to see to the 🐔 so got the rear brake apart. No corrosion just old gummed up grease. Reassembled and operates correctly. All the cables are free and returns by the spring. Still have to reassemble the foot peggs. Next chore is load it up and take it to the car wash.

 

[Foot0069]

Well it's cleaner anyhow.

 

[John1960]

Makes it hard to want to work in the unheated pole barn. But I'm going to give it a shot. View attachment 23032

I couldn’t help but notice that smoker grill in the picture. Do you use it much?