Suzuki ATV Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Pulled hose from crankcase to breather to find that it is blowing fuel. I assume it is top end problem that will require rebuild. Seems that a top end rebuild kit is the answer. Should I stick with stock bore or oversize? General advice is appreciated.
 

·
Administrator
Joined
·
8,986 Posts
If your just looking to do a rebuild a hone and piston kit should do the trick. Though if your looking to liven it up a tad then a bore and a oversized pistol kit would add a little bit of pep.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
If your just looking to do a rebuild a hone and piston kit should do the trick. Though if your looking to liven it up a tad then a bore and a oversized pistol kit would add a little bit of pep.
Thanks for the info. Liven up would be good. Where do you suggest I buy the parts?
 

·
Administrator
Joined
·
8,986 Posts
Wiseco probably has a complete piston kit. Don’t forget to get your cylinder honed before you install everything.
 
1 - 4 of 4 Posts
Top