Suzuki ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
hello I have a 1987 Suzuki Quadrunner 4x4 250cc we have taken apart the propeller shaft to change bearing and seal at front diff as it was leaking and have taken bearing and seal out but... at the cv axle to front diff we have taken seal out but are wondering on how to take bearing out? will we have to take the diff apart to change the two cv drive bearings at diff? or Is there a way to avoid that. also wondering in 1987 style for the Quadrunner is the universal pressed out as we don't see any type of clips thanks for any help in advance.
 

·
Registered
Joined
·
1,785 Posts
There should be c-clips, much like a piston cir-clip.

I took mine down to a local gear and driveline shop and they took it apart for me, got me the correct bearings and put it back together. All for the cost of the bearings.
 
1 - 3 of 3 Posts
Top