Suzuki ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Eiger 400 makes a 1 click noise when trying to start. Replaced battery and solenoid. Removed starter and bench tested and it spins fine. Could it be the plastic relay beside fuses under seat? Also noticed winch would go out but not in. Would this have anything to do with it?
 

·
Super Moderator
Joined
·
7,479 Posts
Start my cleaning all your electrical connections, including all grounds. Start at the battery then work your way to the solenoid, then starter. If you replaced the solenoid and bench tested the starter. Then try replacing the relay since it’s relatively cheap part anyhow. But I would definitely clean all your connections first then go from there.


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Start my cleaning all your electrical connections, including all grounds. Start at the battery then work your way to the solenoid, then starter. If you replaced the solenoid and bench tested the starter. Then try replacing the relay since it’s relatively cheap part anyhow. But I would definitely clean all your connections first then go from there.


Sent from my iPhone using Tapatalk
Thanks. I will check all grounds again.
 
1 - 3 of 3 Posts
Top