Suzuki ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I just bought an 85 250r that aside from being disassembled is in decent shape as far as I can see the lower end is assembled and has new gears bearings and a new rod there is a .060 over piston installed just waiting for the new reeds to come in before I reassemble the top end. Is there any thing I should check or replace before reassembling the bike? Also the guy I got it from gave me a new factory carb should I change the jets before I not all it?
 

·
Super Moderator
Joined
·
7,305 Posts
The jets should be changed according to the change in piston size etc. So if the jets in the carb are still stock then they should be changed. However, i couldn't tell you which ones you would need. Beyond that, check all the fluids and clean the air filter. Just routine stuff basically.
 
1 - 2 of 2 Posts
Top