2019 Kingquad 750 Factory Brushguard - Suzuki ATV Forum
Suzuki KingQuad Discussions for the KingQuad 400,450,750,

 2Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 27 Old 01-03-2019, 03:38 PM Thread Starter
Suzuki ATVer
 
Wyno's Avatar
 
Join Date: Dec 2018
Posts: 19
2019 Kingquad 750 Factory Brushguard

Just wondering if anyone has purchased the factory Suzuki front and rear brush guard for the 2019 kingquad 750 and if they were easy to install. I like the look of them from the pictures on the Suzuki website but didn't want a headache installing them. I only want them for protecting the front and rear plastic from little saplings while trail riding. OneidaSuzuki has them listed for $200 for the front and like $180 for the rear. Any help would be appreciated. Also wanted to know if they connect to the upper rack, it kinda looks like it front the pics.
Drew van Hoof likes this.
Wyno is offline  
Advertisement
 
post #2 of 27 Old 01-03-2019, 07:37 PM
Suzuki ATVer
 
Bloomboy's Avatar
 
Join Date: Dec 2018
Location: Twin Cities
Posts: 10
Wyno,
I'm in the same situation you are. I like the brushguards Suzuki shows but wondering how hard to install? I'm wondering the same about the front a arms.
Bloomboy is offline  
post #3 of 27 Old 01-04-2019, 02:37 PM Thread Starter
Suzuki ATVer
 
Wyno's Avatar
 
Join Date: Dec 2018
Posts: 19
The A-arm guards look easy to install, looks like 2 bolts like the plastic factory ones. I might just order the racks from the dealer and when I take it in for its first 200 mile oil change and so forth I'll have them install the racks. Or if someone buys them before hand and there easy to install I'll do that. I hate things that are a pain in the butt.
Wyno is offline  
Advertisement
 
post #4 of 27 Old 01-04-2019, 04:33 PM
Extreme ATV Enthusiast
 
Zuuk's Avatar
 
Join Date: Dec 2018
Location: Toronto Ontario ,Canada
Posts: 149
Garage
I found all OEM accessory bolt on to be on point and fairly simple, since they are made fit to their product. of course that is somewhat dependent on the users DYI skills/experience too. Its when you get aftermarket accessories is where you could run into challenges and may have to make some modification, although they claim it fits your product. I will get the OEM Bumper little later. I need to upgrade the new KQ a-arm guards 1st, they are the only OEM in the 750 class I see that do no completely cover the bottom of the a-arms , front and rear (sucks!). Suzuki.ca has the aluminum sets for $233 + tx CAD for each pair (front/rear). I could get a whole set of 3/16 aluminum skids by Rival including under the foot board for $470+tx CAD from a local store. Guess what Ill be getting, suffice to say I anticipate that I may need to modify a little, although they say it fits... but well worth it..

2019 King Quad Matte Black 750 EPS SE+
Matte Black Wrap
3000lb Warn Winch
Suzuki Front Bumper
Aluminium Front/Rear A-arm Guards
Kenda Bearclaw HTR Tires (26x9x12 front - 26x11x12 rear)

2006 Kawasaki Brute Force 750 vTwin 4x4i(sold)
Dynatech CDI
UNI Air Filter
ITP Mudlite tires 26x10x12 front and 26x12x12 rear
ITP 12 SS Aluminum Rims
2500lbs Warn Winch
9 inch 90watt CREE LED Light Bar
Zuuk is offline  
post #5 of 27 Old 01-04-2019, 04:41 PM Thread Starter
Suzuki ATVer
 
Wyno's Avatar
 
Join Date: Dec 2018
Posts: 19
Awesome, let us know how the A-arm guards work out. They are next on my list of upgrades. Then some ITP Mudlites to set it all off.
Wyno is offline  
post #6 of 27 Old 01-04-2019, 05:12 PM
Extreme ATV Enthusiast
 
Zuuk's Avatar
 
Join Date: Dec 2018
Location: Toronto Ontario ,Canada
Posts: 149
Garage
Quote:
Originally Posted by Wyno View Post
Awesome, let us know how the A-arm guards work out. They are next on my list of upgrades. Then some ITP Mudlites to set it all off.
Will do Wyno. I had a set of Mudlites on my Brute, the thing was like a spider, crawl up or over anything .

2019 King Quad Matte Black 750 EPS SE+
Matte Black Wrap
3000lb Warn Winch
Suzuki Front Bumper
Aluminium Front/Rear A-arm Guards
Kenda Bearclaw HTR Tires (26x9x12 front - 26x11x12 rear)

2006 Kawasaki Brute Force 750 vTwin 4x4i(sold)
Dynatech CDI
UNI Air Filter
ITP Mudlite tires 26x10x12 front and 26x12x12 rear
ITP 12 SS Aluminum Rims
2500lbs Warn Winch
9 inch 90watt CREE LED Light Bar
Zuuk is offline  
post #7 of 27 Old 01-07-2019, 03:51 PM
Suzuki ATVer
 
Drew van Hoof's Avatar
 
Join Date: Dec 2018
Posts: 14
There's a guy here who has the factory front bumper and posted a picture of it here, it's on a black SE, looks great, general discussion forum, 2019 king quad page 1.

Last edited by Drew van Hoof; 01-07-2019 at 03:54 PM.
Drew van Hoof is offline  
post #8 of 27 Old 01-09-2019, 03:54 PM
ATV Enthusiast
 
JohnDoe1983's Avatar
 
Join Date: Sep 2017
Location: Quebec
Posts: 84
Garage
Here is my setup.
Mud guard at the rear. Winch, bumper. No rear bumper. 2 inches tow ball.

I include a pict of a completely nude bike. Pict not from me.
Cheers.
Attached Images
File Type: jpg IMG_5247.jpg (3.03 MB, 61 views)
File Type: jpg IMG_5267.jpg (788.2 KB, 53 views)
File Type: jpg carcasse.jpg (587.4 KB, 53 views)
File Type: jpg IMG_5248.jpg (3.10 MB, 45 views)

John
Quebec
Canada
King Quad 750AXi PS 2018
JohnDoe1983 is offline  
post #9 of 27 Old 01-09-2019, 05:17 PM Thread Starter
Suzuki ATVer
 
Wyno's Avatar
 
Join Date: Dec 2018
Posts: 19
Your naked pic is awesome, never seen one without the plastic on it. I do like those mud guards, might have to get some myself. Who makes your front brushguard, it looks great on there. Wonder if it would fit my 2019 model. Thanks for the pics.
Wyno is offline  
post #10 of 27 Old 01-09-2019, 05:55 PM
ATV Enthusiast
 
hiltongrizzly's Avatar
 
Join Date: May 2017
Posts: 37
Hi I just got my 19. I traded my 17 KQ Rugged Edition which came with both brush guards. They were mounted on each side of the frame a few inches behind where the winch would be, and at the rack (front). The back was very straight forward.

LET ME TELL YOU they are WELL worth their weight. These are super strong and durable. I rolled my Rugged Edition down a hill end over end , and then about 8 barrel rolls. The handlebars on the throttle side were bent, and thats IT. Absolutely stunned and amazed.

Does anyone know where the power wire is for the winch now?
hiltongrizzly is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
New 2019 kingquad Kmmdad50 ATV General Discussion 28 09-16-2019 05:01 AM
2019 KingQuad Skid Plates Lee N Suzuki KingQuad 22 04-12-2019 05:48 PM
2019 KingQuad Factory Accessory Lee N Suzuki KingQuad 1 11-07-2018 08:18 AM
2019 Suzuki KingQuad Lineup Preview VS_Goose Suzuki ATV News 1 05-17-2018 09:08 AM
2019 Suzuki KingQuad 750 AXi EPS vs. Yamaha Grizzly EPS: By the Numbers VS_Goose Suzuki ATV News 1 05-17-2018 09:01 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome