95 KQ Oil Leak by Pull Starter - Suzuki ATV Forum
Suzuki KingQuad 300 Discussions for the King Quad 300

 
LinkBack Thread Tools Display Modes
post #1 of 7 Old 09-18-2018, 05:10 PM Thread Starter
Suzuki ATVer
 
Chad4372's Avatar
 
Join Date: Sep 2018
Location: Michigan
Posts: 6
95 KQ Oil Leak by Pull Starter

Hello,
When I park my quad after riding, it has a pretty steady oil drip. I took off the skid plates and looked under it.
I found that the oil is coming from the pull starter bolt that is in the 5 o’clock position.
Why is it leaking there? Is there a seal behind the recoil? I cant find anythin online.
Thank
Chad
Chad4372 is offline  
Advertisement
 
post #2 of 7 Old 09-18-2018, 05:53 PM Thread Starter
Suzuki ATVer
 
Chad4372's Avatar
 
Join Date: Sep 2018
Location: Michigan
Posts: 6
Yes, I did check to make sure the bolts werent loose. They were tight and not stripped.

Chad
Chad4372 is offline  
post #3 of 7 Old 09-18-2018, 06:42 PM
Suzuki ATV Master!
 
TCIII's Avatar
 
Join Date: Nov 2013
Location: texas
Posts: 1,633
Yes I believe there is a seal.......check #18

https://www.partzilla.com/catalog/su...wdx/crankshaft

2002 King Quad 300
2001 King Quad 300
1997 King Quad 300
1997 quad Runner 250 2x4
2008 Kawasaki 250 Bayou 2x4
2013 TaoTao 110
TCIII is offline  
Advertisement
 
post #4 of 7 Old 09-18-2018, 07:07 PM Thread Starter
Suzuki ATVer
 
Chad4372's Avatar
 
Join Date: Sep 2018
Location: Michigan
Posts: 6
Great. Thanks!

Any tips on replacing it? This is my first Suzuki. They seem to be a bit over-engineered.

Chad
Chad4372 is offline  
post #5 of 7 Old 09-18-2018, 10:10 PM
Suzuki ATV Master!
 
TCIII's Avatar
 
Join Date: Nov 2013
Location: texas
Posts: 1,633
Should be able to take all the pull starter off and the center cup and dig the old one out and put the new one in.

2002 King Quad 300
2001 King Quad 300
1997 King Quad 300
1997 quad Runner 250 2x4
2008 Kawasaki 250 Bayou 2x4
2013 TaoTao 110
TCIII is offline  
post #6 of 7 Old 09-19-2018, 04:00 AM Thread Starter
Suzuki ATVer
 
Chad4372's Avatar
 
Join Date: Sep 2018
Location: Michigan
Posts: 6
Sounds good.
Thanks for the info.
Chad
Chad4372 is offline  
post #7 of 7 Old 09-22-2018, 04:32 PM Thread Starter
Suzuki ATVer
 
Chad4372's Avatar
 
Join Date: Sep 2018
Location: Michigan
Posts: 6
Thanks for the help guys. It was very easy to take it apart. Worst part was phillips screws/bolts by foot pegs.

New seal will be here Weds.

Thanks again!
Chad
Chad4372 is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil Leak - Loose starter motor MyRideSuzi Suzuki Eiger 400 5 04-04-2018 02:32 PM
engine or pull starter locked? hdf Repair and Maintenance 1 04-05-2017 03:39 PM
'13 King Quad 500 Pull Starter?? suzuguru Suzuki KingQuad 0 03-30-2017 07:43 PM
Recoil (pull) starter bolts sgf Repair and Maintenance 5 04-16-2016 08:21 PM
Will 86 recoil pull starter work on 85 lt185? lolslim Repair and Maintenance 0 02-03-2016 10:29 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome