Eiger 2x4 to 4x4 Conversion - Suzuki ATV Forum
Suzuki Eiger 400 Discussions for the Eiger 400

 
LinkBack Thread Tools Display Modes
post #1 of 1 Old 07-08-2019, 09:12 PM Thread Starter
Extreme ATV Enthusiast
 
bryanta0502's Avatar
 
Join Date: Apr 2017
Posts: 133
Eiger 2x4 to 4x4 Conversion

I just picked up this 2002(i think) eiger 400 2 wheel drive. It got it for a great deal and it needs a coil which I have already ordered. When I got it home i did some more looking around at the thing and noticed that the frame already had mounts for a front differential, telling me that the 2x4 and 4x4 used the same frame. I also noticed what seemed to be “caps” that kept dirt out of the wheel hubs where the cv axles would go. And lastly, looking at the engine where the driveshaft would come out another cap like thing. This got me thinking if it would be possible to remove these “caps” and convert the atv to 4x4 by adding the parts necessary such as axles and the differential. It is covered in mud underneath so my first step is to pressure wash is and take a better look at the spot on the crankcase where the driveshaft would come from and go from there. I am wondering if anyone has done this before or at least attempted it? My research online led to nothing but off topic websites. Click the image to open in full size.
bryanta0502 is offline  
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Suzuki ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Lifting 10 inches and Extending CV axles on Eiger 400 Bkrcmetalworks ATV General Discussion 0 06-04-2018 09:03 PM
King Quad 300 Disc Brake Conversion Kit Dan_Goodwin Suzuki KingQuad 300 5 01-26-2018 11:23 AM
Eiger Front Discs to KQ 300? dougr583 Suzuki KingQuad 300 15 10-18-2017 12:54 PM
Eiger rear brake disk conversion slinger400 Suzuki Eiger 400 0 11-16-2016 09:47 PM
need a thread just for Suzuki Eiger 400 slinger400 Site Issues & Suggestions 6 05-31-2016 09:59 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome