2003 LT-A50 Vacuum port - Suzuki ATV Forum
Suzuki QuadSport Discussions for the Quadsport 50,90,250,400

LinkBack Thread Tools Display Modes
post #1 of 4 Old 08-07-2013, 12:28 PM Thread Starter
Suzuki ATVer
danthman's Avatar
Join Date: Aug 2013
Posts: 1
2003 LT-A50 Vacuum port

Howdy - found some good answers on this forum while rebuilding a Suzuki 50 my buddy bought - but still running into an issue.

We replaced the whole top end with this kit -

New Suzuki Lt A50 LT50 Cylinder Piston Gasket Top End Kit Set 2002 2005 | eBay

Problem is, it doesn't have the vacuum port on the cylinder where the carb bolts on. Also, the cylinder that was on it, doesn't have it either (vacuum port is just hanging). Has anyone bought one of these and had success drilling and tapping and adding your own port? Guy on ebay is being accommodating but looks like I might have to return it and he states none of his have this port.
danthman is offline  
post #2 of 4 Old 08-08-2013, 10:51 AM
Super Moderator
ajl719's Avatar
Join Date: Jan 2010
Location: Iroquois Falls On, Canada
Posts: 6,243
Send a message via Yahoo to ajl719
Unfortunately I'm not at all familiar with LT-A50, so i can't really help you out. But maybe someone else on the forum might. And welcome to the forum.

2000 Suzuki King Quad 300 4x4
K&N Air Filter
2300 lbs Superwinch
Kenda Bear Claws (Rear 25X10-12) - (Front 24X9-11)
Differential Lock Mod
13,000 + km/s
ajl719 is offline  
post #3 of 4 Old 10-27-2013, 08:53 PM
Suzuki ATVer
Stevemahon's Avatar
Join Date: Oct 2013
Posts: 1
Hey danthman, I'm about to order the same top end for my son's tired 03 lta50. What did you end up doing and would you recommend it?

Last edited by Stevemahon; 10-27-2013 at 08:54 PM. Reason: Typo
Stevemahon is offline  
post #4 of 4 Old 11-17-2013, 08:41 AM
Suzuki ATVer
stumpyworks's Avatar
Join Date: Nov 2013
Posts: 2
i just got the same top end kit. i did not realize it was missing that nipple for the hose that comes of of the fuel petcock till i was reinstalling the tank . i puged the hose and it fired right up . the seller offered to fix it but im wondering if it is nesesary . is that hose just to prime the engine ? i had no problems starting it with out the hose hooked up .
stumpyworks is offline  

Quick Reply

Register Now

In order to be able to post messages on the Suzuki ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
LT 80 Oil Port at Carb? DoubleDare Repair and Maintenance 2 04-15-2013 06:35 PM
Quadrunner vacuum line Stevew ATV General Discussion 10 03-25-2013 01:13 PM
99 500 Quadrunner No vacuum nipple on petcock? AKMark Repair and Maintenance 34 09-16-2012 03:31 PM
Air/Fuel? vacuum/flow? Jade1219 Repair and Maintenance 17 02-29-2012 10:05 PM
mice chewed vacuum lines gohndd Repair and Maintenance 2 09-01-2011 02:03 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome